Welcome to Venom-Group.com! | Log In | Register | 0 items

My Account | Order Tracking | Quick Order | Dealer Locator | FAQ

     
     
    ESC

    80A/320A Burst Waterproof Brushed ESC

    80A/320A Burst Waterproof Brushed ESC

    List Price: $58.99

    Stock: Out of Stock

    Qty:

    Item Code: 1397

    80A/320A Burst Waterproof Brushed ESC

    The 320A Waterproof Brushed ESC was designed to be used in cars, trucks, and rock crawlers that run brushed motors. There is an automatic low voltage cut-off that shuts off motor power when the battery voltage reaches 5 volts. In addition, if there is too high of voltage applied to the ESC, we have added a over protection circuit to prevent damage. With simple forward, brake, and reverse controls, setup is quick and easy.

    80A/320A Burst Waterproof Brushed ESC

    Features:

    Specifications:

    • Age Rating:
    • Scale:
    • Length:
    • Width:
    • Height:
    • Wingspan:
    • Weight:
    • Overall Height:
    • Diameter:
    • Flying Weight:
    • Roof Height:
    • Wheelbase:
    • Tire Dims:
    • Beam:
    • Ground Clearance:
    • Motor or Engine:
    • Batteries:
    • Chassis:
    • Charger:
    • Body:
    • Fan:
    • Radio:
    • Drive Train:
    • Speed Control:
    • Servos:
    • Shock Type:
    • Ball Bearings:
    • ESC:
    • Max Current:
    • RPM/V (Kv):
    • Battery Cell Count:
    • Displacement:
    • Bore:
    • Stroke:
    • Max HP:
    • Idle RPM:
    • Fuel Type:
    • Ignition:
    • Carburetion:
    • Net Weight:
    • Manual Pull Start:
    • Battery Type:
    • Configuration:
    • Dimensions:
    • Plug Type:
    • Capacity:
    • Cell Configuration:
    • Voltage:
    • Amp Rating:
    • Charge Rate:
    • Continuous Discharge:
    • Min Discharge Volts Per Pack:
    • Max Burst Rate:
    • Max Volts Per Cell:
    • Max Volts Per Pack:
    • Watt Hours:
    • Input:
    • Output:
    • Operating Voltage:
    • Circuit Power:
    • Charge Current:
    • Current Drain of Balancing Lipo:
    • NiCD/NiMH Cell Count:
    • LiPO/LiFe/Li-ION:
    • Pb Battery Voltage:
    • Lead Acid (Pb):
    • Discharge Rate:
    • Charge / Discharge Cycles:
    • Charge Current Range:
    • Li-ION/Polymer Cell Count:
    • Channel 1:
    • Channel 2:
    • Channel 3:
    • Channel 4:
    • USB:
    • Operating System:
    • Power Requirement:
    • PWM Frequency:
    • Setting:
    • Current Capacity (FET rating):
    • BEC Voltage:
    • Programmable:
    • Battery Connector:
    • Turns:
    • Timing:
    • RPM:
    • Shaft Diameter:
    • Material:
    • Transmitter:
      • Specifications:
      • Code Format:
      • Frequency:
      • Channels:
      • Transmiting Power:
      • DC Input:
      • Weight:
      • Model Type:
      • Modulation:
      • Low Voltage Warnings:
      • DSC Port:
      • Includes:
    • Receiver:
      • Part Number:
      • Channel 1:
      • Channel 2:
      • Channel 3:
      • Channel 4:
    • Recommended Batteries:
    • Display Contents:
    • Power Requirement: 4-7 Cell NiMH, 2 Cell LiPO (Do Not use 8 Cell NiMH's or 3 Cell LiPO's)
      Input Voltage: 6V-8.4V
      BEC output: 5V/1A
      Constant Current: 320A, Forward: 320A, Back: 200A
      Dims:  32 x 32 x 22 mm
      Motor Range: 540 11 - 60T
      Waterproof: Yes
      Fail safe Protection: Yes
      Low Voltage Protection: Yes
      Over Voltage Protection: Yes
      Low Voltage Cutoff: 5V, non-adjustable

    Required Items:

    Only Work With:

    Tech Notes:

    This Brushed ESC can be used with Lithium Polymer batteries with the use of an external Low Voltage Cutoff. The standard ESC cutoff cuts off at 5V, which is too low for 2-Cell Lithium Batteries. Proper cutoff voltage for a 2-Cell Lithium Polymer battery is 6.0V.

    Certifications:

    Replacement Items View All

    Hop Ups

    GUARANTEE

    All products are inspected and adjusted individually before leaving the manufacturer and are guaranteed to be free of material defects and manufacturing faults.

    General Warranty Policies

    Atomik products are warranted to be free of material and workmanship defects for a period of 30 days* from date of purchase for all electronic components and 90 days* for all non-electronic components. If a component is defective or was not correctly made, Atomik will, at its sole discretion, repair or replace the item free of charge. This warranty does not cover normal wear and tear, crash damage, modifications, failure to perform routine maintenance, or any damages arising as a result of improper use.

    Important Notice

    Atomik assumes sole responsibility for our products; therefore, dealers should not be involved in any warranty issues. All warranty claims are to be directed to Atomik Customer Service.

    Before returning any defective product, please contact Atomik Customer Service to receive a Return Merchandise Authorization Number. A dated, itemized sales receipt must accompany any product returned for warranty work.

    Release of Liability

    Atomik it's affiliates, manufacturers, distributors, or retail partners shall not be held liable for any accident, injury to persons, or damage to property resulting from use, misuse, or abuse of any Atomik product. In purchasing a Atomik product the user agrees to accept responsibility for all such risks.

    Customer Reviews

    Write a review