1/10 Gambler RTR SCT - Brushless - Red

Features:

• VCD Precision Universal Drives
• VR3S 3-Ch 2.4GHz radio featuring adjustable endpoints
• High Performance 540 3300kv Brushless Motor and 80A Waterproof Brushless ESC
• Pre-screened impact resistant Polycarbonate body with full color Gambler body graphics
• Battery compartment accommodates 6, 7, and 8 cell NiMH packs and 2-3 cell LiPO packs
• Racing suspension with fully adjustable geometry
• Externally adjustable slipper clutch
• Tough four gear planetary bevel gear differential
• Scale tube bumpers and side nerf bars take abuse and protect the vehicle from damage and tangling with other trucks
• Threaded composite shocks
• Sealed radio box keeps your electronics dry and clean
• Adjustable steering servo saver
• 3pc Beadlox Wheel System with Griplox Inserts

Specifications:

• Age Rating: 14+ With Adult Supervision
• Scale: 1:10
• Length: 21.73 in (551.9 mm)
• Width: 11.65 in (295.9 mm)
• Height: 7.89 in (200.5 mm)
• Wingspan:
• Weight:
• Overall Height:
• Diameter:
• Flying Weight:
• Roof Height:
• Wheelbase: 13.01 in (330.45 mm)
• Tire Dims:
• Beam:
• Ground Clearance: 1.51 in (38.35 mm)
• Motor or Engine: V540 3300kV Brushless Motor
• Batteries: 7-Cell 3000mAh NiMH
• Chassis:
• Charger: 7-Cell NiMH Wall Charger
• Body:
• Fan:
• Radio: VR3S 2.4GHz 3-Ch TX/RX
• Drive Train:
• Speed Control:
• Servos:
• Shock Type:
• Ball Bearings:
• ESC: 80amp Waterproof Brushless
• Max Current:
• RPM/V (Kv):
• Battery Cell Count:
• Displacement:
• Bore:
• Stroke:
• Max HP:
• Idle RPM:
• Fuel Type:
• Ignition:
• Carburetion:
• Net Weight:
• Manual Pull Start:
• Battery Type:
• Configuration:
• Dimensions:
• Plug Type:
• Capacity:
• Cell Configuration:
• Voltage:
• Amp Rating:
• Charge Rate:
• Continuous Discharge:
• Min Discharge Volts Per Pack:
• Max Burst Rate:
• Max Volts Per Cell:
• Max Volts Per Pack:
• Watt Hours:
• Input:
• Output:
• Operating Voltage:
• Circuit Power:
• Charge Current:
• Current Drain of Balancing Lipo:
• NiCD/NiMH Cell Count:
• LiPO/LiFe/Li-ION:
• Pb Battery Voltage:
• Lead Acid (Pb):
• Discharge Rate:
• Charge / Discharge Cycles:
• Charge Current Range:
• Li-ION/Polymer Cell Count:
• Channel 1:
• Channel 2:
• Channel 3:
• Channel 4:
• USB:
• Operating System:
• Power Requirement:
• PWM Frequency:
• Setting:
• Current Capacity (FET rating):
• BEC Voltage:
• Programmable:
• Battery Connector:
• Turns:
• Timing:
• RPM:
• Shaft Diameter:
• Material:
• Transmitter:
  • Specifications:
  • Code Format:
  • Frequency:
  • Channels:
  • Transmiting Power:
  • DC Input:
  • Weight:
  • Model Type:
  • Modulation:
  • Low Voltage Warnings:
  • DSC Port:
  • Includes:
• Receiver:
  • Part Number:
  • Channel 1:
  • Channel 2:
  • Channel 3:
  • Channel 4:
• Recommended Batteries:
• Display Contents:
• ESC Specifications:
  Continuous Current: 80amps
  BEC: 5V/ 3A
  Dimensions: 47 x 41 x 29 mm
  Weight: 3.14 oz (79.76 g)
  Waterproof: Yes
  Programmable: Yes - Optional programming card sold separately. (1390)
  Connector: EC3

Required Items:

Only Work With:

Tech Notes:

You will need (8) AA batteries for the transmitter.

Certifications:

• FCC Compliant
• CE Approved